PRODUCTS - Tile Profile

Base Material : Colour Coated Steel as per IS 14246

1 All dimensions are in mm, 2 Dimensions are indicative and tolerances as per IS:277-2003

Brick Red

Seco Red

Grass Green

Firoza Blue

Terracotta

Off White

For Tile Profile, the roof slope should be minimum 20 degrees and purlin to be provided on every alternate tile. If your roof length is 34 feet, you can take 3 sheets of 12 feet.
Material Confirms to: ASTM A653/ A755, IS 277, JIS3312/3322, AS 1397

Technical Specification of Pre-Painted Alu-Zinc Sheets (Galvalume) (55% Aluminum, 45% Zinc Alloy)

Pre-Painted Alu- Zinc Steel Steets (GI-Base)
Particulars	Details
Alu-Zinc coating/ Zinc coating	AZ 150/70 Z 120/100
Primer service coat	5 microns epoxy on both sides
Paint Coating	Regular Modified Polyster (RMP) (optional- silicon modified polyester & PVF 2)
Top coat Thickness (Top)	15 to 18 microns
Bottom coat thickness (bottom)	5 to 7 microns
Surface paint reflection	Glossy finish (optional- Matt Finish)
Conforms to	ASTM A653/ A755, IS277, JIS3312/ 3322, AS1397